+90 232 376 88 22
info@polser.com
satis@polser.com
Mon-Fri: 09:00-18:00

ISOLITE

Isolite Construction Industry Isolite Construction Industry Polser FRP

ISOLITE® DOUBLE SKIN ROOFLIGHT PANEL is the brand name for factory assembled insulating rooflight (FAIR) panels which are manufactured by Polser FRP Panels Inc. by assembling two sheets of FIBRALAM glass fiber reinforced plastic (GRP) translucent sheets with high density EPDM foam spacers. In the composition of FIBRALAM sheets high quality polyester resins and glass fiber seinforcements which provide high mechanical strength are used.

Profile Type (the name of  the matching sandwich panel)

Thickness of top and bottom sheets (min.1.5 mm)

Number of Panel

Type of Isolite panel

Left or Right Type of panels

The purlin distance (for the first purlin -a, normal purlin - b )

* ISOLITE panels are produced with a standard cut back of 15 cm. unless specified by the customer.(c)

GENERAL DESCRIPTION

ISOLITE panels are produced to match PUR, EPS and rock wool sandwich panels which are used for roofing and cladding of industrial buildings. Our sales department would design and make offers for your special profile inquiries.

Two layers Fibralam CTP which is produced with the continuous patterning technique by Polser Şeffaf Çatı Örtüleri San. ve Tic. A.Ş. (Polser Transparent Roof Wraps Industry and Commerce Joint Stock Company) forms with mounting of transparent plate by using tapes, which are barricadable to polyethylene foam and heat bridge which are in high density to each other.

Low thermal  Transmission Coefficient
By means of combining two GRP sheets having low thermal conductivity as a natural characteristic with a well studied design a low U value of 3.0 L/m²K is achieved. 

Humidity and Mildew
ISOLITE panels guaranty the impermeability thanks to the spicial silicon mastics used which are resistant against temperatures up to 100 C.

MONOBLOCK PANELS
ISOLITE panels are produced in lengths according to the requirements of your projects which might be from ridge to gutter as one piece or with shorter lenghts than sandwich panels. So that a light stripe might be formed on the roof of an industrial building along the slope or along the length. 

The following details should be communicated when inquiring Isolite Panels.  

Isolite Panel Siparişlerinde aşağıdaki detayların bildirilmesi gereklidir:

- Panel Uzunluğu (L)
- Profilin tipi (hangi metal sandviç panele uygun olacağı)
- Üst ve alt levha kalınlıkları (min.1.5 mm)
- Panel Sayısı
- Isolite ürün çeşidi
- Panellerin sağ veya sol tipte olduğu
- Aşık arası mesafesi (ilk aşık-a, normal aşık –b)
- Isolite paneller ayrıca bildirilmediği taktirde standart olarak 15 cm binme payı ile üretilirler.(c)

PRODUCT TYPES CHEMICAL RESISTANCE
ISOLITE panels might be produced with below combination of Fibralam Sheets.
TOP SHEET BOTTOM SHEET
Fibralam ST MUV Fibralam ST UV
Fibralam ST JUV Decolite ST JUV
Fibralam ACRYL MUV Fibralam ACRYL UV
Fibralam ACRYL JUV Decolite  ACRYL UV

Fibralam ST MUV:Standart Fibralam sheets which are produced with UV resistant orthophalic polyester resins. The top surface is coated with Melinex 301 polyester film.

Fibralam ST JUV: Standart Fibralam sheets which are produced with UV resistant orthophalic polyester resins. The top surface is coated with UV resistant ISO NPG coat.

Fibralam ACRYL MUV: Fibralam sheets which are produced with UV resistant acrylic modified polyester resins. The top surface is coated with Melinex 301 polyester film.

Fibralam ACRYL JUV: Fibralam sheets which are  produced with UV resistant acrylic modified polyester resin. The top surface is coated with the  UV resistant ISO NPG gelcoat.

Fibralam ST UV: Standart Fibralam sheets which are produced with UV resistant orthophalic polyester resins.

Decolite ST JUV:Standart Decolite sheets which are produced with UV resistant orthophalic polyester resins. The bottom surface has a hexagonal texture to diffuse the light homogenously and is coated with UV resistant ISO NPG gelcoat

Fibralam ACRYL UV: Fibralam sheets which are produced with UV resistant acrylic modified polyester resins.

Decolite  ACRYL UV: Decolite sheets which are produced with UV resistant acrylic modified polyester resins. The bottom surface has a hexagonal texture to diffuse the light homogenously.

ISOLITE panels remain virtually unaffected in many chemical environments. They have an excellent resistance to general corrosion for surfae contacts with strong chemicals. After contact with chemicals, washing the sheet's surface with sufficient amount of water would extend the life of the product. Some of the common chemicals which ISOLITE panels resistant against are as follows:

CHEMICAL CONCENTRATION
Acetic Acid 5 %
Hydrochloric Acid 10 %
Nitric Acid  10 %
Sulphuric Acid 30 %
Etyl Alcohol  95 %
Benzyl 30 %
Toluol  30 %
Carbon Sulphur  30 %
Note:For chemicals stronger or different than above mentioned ones please contact our marketing department.
Tolerances
Length -0 mm +10 mm
Width -3 mm +3 mm
Thickness -2 mm +2 mm
Squareness -10 mm +10 mm
TYPICAL ROOF LAYOUTS FOR DIFFERENT TYPES OF INSTALLATIONS
Chequer Board From Ridge to Gutter Light stripe at the ridge Along the slope
INSTALLATION

Resmi büyük görmek için üzerine tıklayınız.

The Poliethylene foam should rest on purlins.

For end laps the screwing should be done over the cut back without drilling through the spacer foam of the Isolite panel. A tail stiching screw is recommended.32mm. screws should be applied at every intermediate purlin to be drilled through the spacer foam of the Isolite panel.

Due to the fact that the GRP sheets are 2 to 3 times thicker than the metal seets it is not possible for those two different types of material to have exactly the same profile. For this reason it is recommended to order at longest possible lengths to minimize the number of end laps.

The minimum roof slope is 7% (recommended)

Direction of assembly should be in the opposite direction of the main wind direction.

 

PACKAGING:
Unless required differently the panels are stacked on pallets and wrapped with nylon films.  In order to minimize the stack height the panels are placed with profiled sides facing each other. The maximum height of the pallet is approx. 110 cm.

Like what you see?

Close

Hit the buttons below to follow us, you won't regret it...